Child Care Products Combination Paper Towel/Waste Dispensers Grab Bars Hand and Hair Dryers Health Care Accessories Hooks Mirrors Paper Towel Dispensers Sanitary Napkin/Tampon Dispensers Sanitary Napkin/Tampon Disposals Shelves and Custodial Accessories Shower and Tub Accessories Soap Dispensers Toilet Paper Holders Toilet Seat Cover Dispensers Waste Receptacles

Metal Lockers Plastic Laminate Lockers Solid Phenolic Core (SPC) Solid Plastic (HDP) Wood Lockers

Mailboxes Fire Extinguishers & Cabinets Access Panels Cubicle Track & Curtains Misc. Specialty Items

 

We accept Visa, MasterCard, The Discover Card, and American Express.

American Building Specialties Corp (ABS) can provide stainless steel bathroom partitions from the following toilet compartment manufacturers:    General Partitions, Hadrian, Knickerbocker,  Ampco, All American, Global, Flush Metal, Mills Partitions and Accurate Partitions.

General Partitions now offering Stainless Steel  floor mounted overhead braced partitions on a 3 working day shipment program.  Material is restricted to the following standard items:

Doors 58" high : 24, 26, 34, & 36    Panels 58" high:  24", 36", 48", 57", 60", 61 1/4" & 72" 

Wall Hung Screens 48" high: 18" &24"  Pilasters 82" high : 1-1/4", 3, 4, 5, 6, 8,10, 12, 14, 18, & 24

Stainless steel bathroom partitions are available in all styles for toilet partitions, shower and dressing compartments. Stainless steel, the deluxe steel restroom partition material is easily cleaned and can't rust. Dirt, grease and cosmetics are easily removed. Even scratches can be eliminated by buffing the finish and blending the surface.

Panel & Doors  - Double-Wall Construction toilet partitions -- Shall be 1" thick with two sheets of #304 stainless steel No. 4 finish bonded together with honeycomb core.

Pilasters  -  Shall be 1 1/4" thick with two sheets of #304 stainless steel No. 4 finish bonded  together with honeycomb core.  Same construction as panel specification outlined above.

Floor Mounted - Pilasters are to be anchored to floor with standard threaded rod, hex nuts and washers to provide vertical adjustment and necessary strength.

Floor Mounted Overhead Braced - Pilasters are to be anchored to floor with heavy gauge angle. Top of pilasters to be securely braced with extruded aluminum headrail with integral crown loafer rail.

Headrail -To be 1 7/8" x 1 5/32" x 1/16" with integral crown loafer rail, extruded aluminum heat-treated and anodized with necessary fittings.

Ceiling Hung - Pilasters -- Pilasters are to be anchored to overhead member (which member is to be supplied by others) with standard 3/8" threaded rod, hex nuts and washers to provided vertical adjustment and necessary strength.

Hardware - Concealed latch, coat hooks & bumper, hinge brackets, and door stop and keeper  heavy casting nonferrous alloy, chrome-plated. Concealed hinge works on opposing nylon cams under spring tension. Top pivot pin, mounted within door having bearing points above and below hinge bracket. Stainless Steel and Chrome Plated Brass available at additional cost.

Fittings - Wall connection brackets for panels and pilasters to be high strength heavy chrome plated. Pilaster trim to be 3" high..031 stainless steel. All hardware and fittings to be secured with chrome plated one-way vandal-proof sex bolts or No. 14 plated-steel metal screws of proper lengths. Stainless Steel, Chrome Plated Brass, and continuous aluminum brackets available at additional cost.