Middle Level Option
Plastic laminates are available in all styles for toilet partitions, and dressing compartments but should not be used for showers or near shower areas. Plastic laminate material is easily cleaned and can't rust. Dirt, grease and cosmetics do not penetrate the durable plastic surface which is highly resistant to scratches making it a great choice for bathroom partitions.
Panels & Doors -Shall be 1" finish thickness with faces and edging 1/16" general purpose laminated plastic. Bonded under pressure to a solid 45 lb. density particle board core assuring a rigid permanent bond.
Pilasters - Shall be 1 1/4" finish thickness with faces and edging 1/16" general purpose laminated plastic. Same construction as panel specification outlined above.
Floor Mounted - Pilasters are to be anchored to the floor with standard threaded rod, hex nuts and washers to provide vertical adjustment and necessary strength.
Floor Mounted Overhead Braced - Pilasters are to be anchored to the floor with heavy gauge angle. Top of pilasters to be securely braced with extruded aluminum headrail with integral crown loafer rail.
Headrail -To be 1 7/8" x 1 5/32" x 1/16" with integral crown loafer rail, extruded aluminum heat-treated and anodized with necessary fittings.
Ceiling Hung - Pilasters are to be anchored to overhead member (which member is to be supplied by others) with standard threaded rod, hex nuts, and washers to provide vertical adjustment and necessary strength.
Hardware - Concealed latch, coat hooks & bumper, hinge brackets, and door stop and keeper heavy casting nonferrous alloy, chrome-plated. Concealed hinge works on opposing nylon cams under spring tension. Top pivot pin, mounted within door having bearing points above and below hinge bracket. Stainless Steel at additional cost.
Fittings - Wall connection brackets for panels and pilasters to be high strength heavy chrome plated. Pilaster trim to be 3" high..031 stainless steel. All hardware and fittings to be secured with chrome plated one-way vandal-proof sex bolts or No. 14 plated-steel metal screws of proper lengths. Stainless Steel and continuous aluminum brackets available at additional cost.